#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --with-root=path      specify a cross-compilation root-directory"
ac_help="$ac_help
  --without-GTK           no support for GTK"
ac_help="$ac_help
  --with-GTK2             Use GTK 2.0 if found"
ac_help="$ac_help
  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)"
ac_help="$ac_help
  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
  --disable-gtktest       Do not try to compile and run a test GTK program"
ac_help="$ac_help
  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)"
ac_help="$ac_help
  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
  --disable-gtktest       Do not try to compile and run a test GTK program"
ac_help="$ac_help
  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)"
ac_help="$ac_help
  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
  --disable-gtktest       Do not try to compile and run a test GTK program"
ac_help="$ac_help
  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)"
ac_help="$ac_help
  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
  --disable-gtktest       Do not try to compile and run a test GTK program"
ac_help="$ac_help
  --with-libglade-config=LIBGLADE_CONFIG  Location of libglade-config"
ac_help="$ac_help
  --with-GL-prefix=DIR    Prefix where GL/MesaGL is installed"
ac_help="$ac_help
  --with-lib-GL           use '-lGL'"
ac_help="$ac_help
  --with-lib-MesaGL       use '-lMesaGL'"
ac_help="$ac_help
  --without-gnome         no support for gnome"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=new_build_pgtk.pike

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



  CONFIG_HEADERS="pgtk_config.h"
  
  




  
  
  cat >pike_GTK2.feature <<EOF
GTK2................ no (forced without)
EOF



  
  
  cat >pike_GTK.feature <<EOF
GTK................. no (forced without)
EOF



  
  
  cat >pike_Gnome.feature <<EOF
Gnome............... no (forced without)
EOF



  
  
  cat >pike_GTK_GladeXML.feature <<EOF
GTK.GladeXML........ no (forced without)
EOF



  
  
  cat >pike_GTK_GlArea.feature <<EOF
GTK.GlArea.......... no (forced without)
EOF





# $Id: aclocal.m4,v 1.66 2005/06/03 11:49:05 grubba Exp $


  
  
  

  # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:625: checking for $ac_word" >&5
if eval "test \"`echo '$''{'pike_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  pike_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      pike_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$pike_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'pike_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  pike_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      pike_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $pike_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    pike_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$pike_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:706: checking for $ac_word" >&5
if eval "test \"`echo '$''{'pike_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  pike_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      pike_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$pike_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi


  
  if test "x$enable_binary" != "xno"; then
    if test "${ac_prog_cc_works_this_run-}" != "yes" ; then
      echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 753 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:784: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

      ac_prog_cc_works_this_run="${ac_cv_prog_cc_works-no}"
      export ac_prog_cc_works_this_run
    else
      echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:792: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
      echo "$ac_t""(cached) yes" 1>&6
    fi
  fi

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:798: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:807: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:826: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi


  if test "$ac_test_CFLAGS" = set; then :; else
    if test "$GCC" = yes; then
      # Remove -O2, and use a real test to restore it.
      if test "$ac_cv_prog_cc_g" = yes; then
	CFLAGS="-g"
      else
	CFLAGS=
      fi
    else :; fi
  fi

  echo $ac_n "checking if we are using TCC""... $ac_c" 1>&6
echo "configure:870: checking if we are using TCC" >&5
  if eval "test \"`echo '$''{'pike_cv_prog_tcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    case "`$CC -V 2>&1|head -n 1`" in
      tcc*)
        pike_cv_prog_tcc="yes"
      ;;
      *) pike_cv_prog_tcc="no" ;;
    esac
  
fi

  if test "x$pike_cv_prog_tcc" = "xyes"; then
    echo "$ac_t""yes" 1>&6
    TCC="yes"
    if echo "$CC $CFLAGS $CPPFLAGS" | grep " -Y" >/dev/null; then :; else
      # We want to use the system API's...
      CPPFLAGS="-Ysystem $CPPFLAGS"
    fi
  else
    echo "$ac_t""no" 1>&6
    TCC=no
  fi

  
  echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:898: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 913 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:919: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 930 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:936: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 947 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

  if test "x$enable_binary" = "no"; then
    # Do the check above even when --disable-binary is used, since we
    # need a real $CPP, and AC_PROG_CPP wants AC_PROG_CC to be called
    # earlier.
    CC="$BINDIR/nobinary_dummy cc"
  fi


cat >> confdefs.h <<\EOF
#define POSIX_SOURCE 
EOF





dependencies=$srcdir/dependencies




# Check whether --with-root or --without-root was given.
if test "${with_root+set}" = set; then
  withval="$with_root"
  
  case "$with_root" in
    /)
      with_root=""
    ;;
    /*)
    ;;
    no)
      with_root=""
    ;;
    *)
      echo "configure: warning: Root path $with_root is not absolute. Ignored." 1>&2
      with_root=""
    ;;
  esac

else
  with_root=""
fi


if test "x$enable_binary" = "xno"; then
  # Fix makefile rules as if we're cross compiling, to use pike
  # fallbacks etc. Do this without setting $ac_cv_prog_cc_cross to yes
  # since autoconf macros like AC_TRY_RUN will complain bitterly then.
  CROSS=yes
else
  CROSS="$ac_cv_prog_cc_cross"
  # newer autoconf
  if test x"$CROSS" = x; then
     CROSS="$cross_compiling"
  fi
fi



if test "x$enable_binary" = "xno"; then
  RUNPIKE="USE_PIKE"
  RUNTPIKE="USE_PIKE"
elif test "x$ac_cv_prog_cc_cross" = "xyes"; then
  RUNPIKE="DEFAULT_RUNPIKE"
  RUNTPIKE="USE_PIKE"
else
  RUNPIKE="DEFAULT_RUNPIKE"
  RUNTPIKE="USE_TPIKE"
fi




  rm pike_*.feature 2>/dev/null


if test -d $BUILD_BASE/modules/. ; then
  dynamic_module_makefile=$BUILD_BASE/modules/dynamic_module_makefile
  static_module_makefile=$BUILD_BASE/modules/static_module_makefile
else
  dynamic_module_makefile=$BUILD_BASE/dynamic_module_makefile
  static_module_makefile=$BUILD_BASE/dynamic_module_makefile
fi



# Check whether --with-GTK or --without-GTK was given.
if test "${with_GTK+set}" = set; then
  withval="$with_GTK"
  :
else
  with_GTK=yes
fi

# Check whether --with-GTK or --without-GTK was given.
if test "${with_GTK+set}" = set; then
  withval="$with_GTK"
  :
else
  with_GTK2=no
fi


for ac_func in gethrtime signal sigaction 
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1084: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1089 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:1112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


# Force prototypes from X's headerfiles.
cat >> confdefs.h <<\EOF
#define FUNCPROTO 1
EOF


echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1144: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1149 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1157: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1174 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1192 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 1213 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:1224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi


  if test "x$enable_binary" != "xno"; then
    for ac_hdr in signal.h netinet/in.h arpa/inet.h sys/types.h sys/stat.h \
	fcntl.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:1254: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1259 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

  else
    for ac_hdr in signal.h netinet/in.h arpa/inet.h sys/types.h sys/stat.h \
	fcntl.h
    do
      ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
      eval "ac_cv_header_$ac_safe=yes"
    done
  fi



if test "x$with_GTK" = "xyes" ; then
  
  
  
  
  cat >pike_GTK_GlArea.feature <<EOF
GTK.GlArea.......... no (dependencies failed)
EOF


  
  
  
  cat >pike_GTK.feature <<EOF
GTK................. no (dependencies failed)
EOF


  
  
  
  cat >pike_GTK_GladeXML.feature <<EOF
GTK.GladeXML........ no (dependencies failed)
EOF


  if test "x$with_GTK2" = "xyes" ; then
    
  
  
  cat >pike_GTK2.feature <<EOF
GTK2................ no (dependencies failed)
EOF


    
  if test "x$enable_binary" = "xno"; then
    # Extract the first word of "nobinary_dummy", so it can be a program name with args.
set dummy nobinary_dummy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1341: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PKG_CONFIG" in
  /*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$BINDIR"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
if test -n "$PKG_CONFIG"; then
  echo "$ac_t""$PKG_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PKG_CONFIG" in
  /*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
if test -n "$PKG_CONFIG"; then
  echo "$ac_t""$PKG_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  fi

  else
     PKG_CONFIG=no
  fi





 if test "$PKG_CONFIG" = "no" ; then
   
  if test "x$enable_binary" = "xno"; then
    # Extract the first word of "nobinary_dummy", so it can be a program name with args.
set dummy nobinary_dummy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1427: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG" in
  /*)
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$BINDIR"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
  ;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
  echo "$ac_t""$GTK_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    # Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1464: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG" in
  /*)
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
  ;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
  echo "$ac_t""$GTK_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  fi

   # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
  withval="$with_gtk_prefix"
  gtk_config_prefix="$withval"
else
  gtk_config_prefix=""
fi

# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
  withval="$with_gtk_exec_prefix"
  gtk_config_exec_prefix="$withval"
else
  gtk_config_exec_prefix=""
fi

# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
  enableval="$enable_gtktest"
  :
else
  enable_gtktest=yes
fi


  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test -f $gtk_config_exec_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
       fi
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test -f $gtk_config_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
       fi
     fi
  fi


  min_gtk_version=1.2.0
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:1548: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$LIBS $GTK_LIBS"
      rm -f conf.gtktest
      if test "$cross_compiling" = yes; then
  
        # Cross-compiling
        cat > conftest.$ac_ext <<EOF
#line 1571 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
        
int main() {

  return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
        
; return 0; }
EOF
if { (eval echo configure:1583: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
          echo $ac_n "cross compiling; looks ok... $ac_c"
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
          no_gtk=yes
          echo $ac_n "cross compiling; linking failed... $ac_c"
        
fi
rm -f conftest*
      
else
  cat > conftest.$ac_ext <<EOF
#line 1601 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
#include <sys/stat.h>
#endif
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif

int
main ()
{
  int major, minor, micro;
  char *tmp_version;
  FILE *fp;

  /* Don't use system(3C) since it isn't thread-safe.
   *
   * system ("touch conf.gtktest");
   */
  if ((fp = fopen("conf.gtktest", "a+")) != 0) {
    fclose(fp);
  }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {

      }
    }
  return 1;
}

EOF
if { (eval echo configure:1673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

      CFLAGS="$ac_save_CFLAGS"
      LIBS="$ac_save_LIBS"
    fi
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     have_gtk_120=gtk_120
  else
     echo "$ac_t""no" 1>&6
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 1707 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>

int main() {
 return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:1717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     have_gtk_120=no_gtk_120
  fi
  
  
  rm -f conf.gtktest

   if test x$have_gtk_120 = xno_gtk_120 ; then
     # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
  withval="$with_gtk_prefix"
  gtk_config_prefix="$withval"
else
  gtk_config_prefix=""
fi

# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
  withval="$with_gtk_exec_prefix"
  gtk_config_exec_prefix="$withval"
else
  gtk_config_exec_prefix=""
fi

# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
  enableval="$enable_gtktest"
  :
else
  enable_gtktest=yes
fi


  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test -f $gtk_config_exec_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
       fi
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test -f $gtk_config_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
       fi
     fi
  fi


  min_gtk_version=1.1.13
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:1805: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$LIBS $GTK_LIBS"
      rm -f conf.gtktest
      if test "$cross_compiling" = yes; then
  
        # Cross-compiling
        cat > conftest.$ac_ext <<EOF
#line 1828 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
        
int main() {

  return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
        
; return 0; }
EOF
if { (eval echo configure:1840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
          echo $ac_n "cross compiling; looks ok... $ac_c"
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
          no_gtk=yes
          echo $ac_n "cross compiling; linking failed... $ac_c"
        
fi
rm -f conftest*
      
else
  cat > conftest.$ac_ext <<EOF
#line 1858 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
#include <sys/stat.h>
#endif
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif

int
main ()
{
  int major, minor, micro;
  char *tmp_version;
  FILE *fp;

  /* Don't use system(3C) since it isn't thread-safe.
   *
   * system ("touch conf.gtktest");
   */
  if ((fp = fopen("conf.gtktest", "a+")) != 0) {
    fclose(fp);
  }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {

      }
    }
  return 1;
}

EOF
if { (eval echo configure:1930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

      CFLAGS="$ac_save_CFLAGS"
      LIBS="$ac_save_LIBS"
    fi
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     WITH_GTK=1
  else
     echo "$ac_t""no" 1>&6
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 1964 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>

int main() {
 return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:1974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     WITH_GTK=0
  fi
  
  
  rm -f conf.gtktest

   else
     WITH_GTK=1 
   fi
 else
   if pkg-config gtk+-2.0 2>/dev/null ; then
     
  
  
  cat >pike_GTK2.feature <<EOF
GTK2................ yes
EOF


     GTK_CFLAGS="`pkg-config gtk+-2.0 --cflags`"
     GTK_LIBS="`pkg-config gtk+-2.0 --libs`"
     echo "**** WARNING: Using GTK 2.0"
     echo "**** THis is not recommended"
     echo "LIBS: $GTK_LIBS"
     echo "CFLAGS: $GTK_CFLAGS"
     echo $ac_n "checking for iconv in -liconv""... $ac_c" 1>&6
echo "configure:2032: checking for iconv in -liconv" >&5
ac_lib_var=`echo iconv'_'iconv | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-liconv $GTK_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2040 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char iconv();

int main() {
iconv()
; return 0; }
EOF
if { (eval echo configure:2051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo iconv | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-liconv $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

     WITH_GTK=2
   else
     
  if test "x$enable_binary" = "xno"; then
    # Extract the first word of "nobinary_dummy", so it can be a program name with args.
set dummy nobinary_dummy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2085: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG" in
  /*)
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$BINDIR"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
  ;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
  echo "$ac_t""$GTK_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    # Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2122: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG" in
  /*)
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
  ;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
  echo "$ac_t""$GTK_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  fi

     # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
  withval="$with_gtk_prefix"
  gtk_config_prefix="$withval"
else
  gtk_config_prefix=""
fi

# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
  withval="$with_gtk_exec_prefix"
  gtk_config_exec_prefix="$withval"
else
  gtk_config_exec_prefix=""
fi

# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
  enableval="$enable_gtktest"
  :
else
  enable_gtktest=yes
fi


  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test -f $gtk_config_exec_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
       fi
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test -f $gtk_config_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
       fi
     fi
  fi


  min_gtk_version=1.2.0
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:2206: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$LIBS $GTK_LIBS"
      rm -f conf.gtktest
      if test "$cross_compiling" = yes; then
  
        # Cross-compiling
        cat > conftest.$ac_ext <<EOF
#line 2229 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
        
int main() {

  return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
        
; return 0; }
EOF
if { (eval echo configure:2241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
          echo $ac_n "cross compiling; looks ok... $ac_c"
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
          no_gtk=yes
          echo $ac_n "cross compiling; linking failed... $ac_c"
        
fi
rm -f conftest*
      
else
  cat > conftest.$ac_ext <<EOF
#line 2259 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
#include <sys/stat.h>
#endif
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif

int
main ()
{
  int major, minor, micro;
  char *tmp_version;
  FILE *fp;

  /* Don't use system(3C) since it isn't thread-safe.
   *
   * system ("touch conf.gtktest");
   */
  if ((fp = fopen("conf.gtktest", "a+")) != 0) {
    fclose(fp);
  }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {

      }
    }
  return 1;
}

EOF
if { (eval echo configure:2331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

      CFLAGS="$ac_save_CFLAGS"
      LIBS="$ac_save_LIBS"
    fi
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     have_gtk_120=gtk_120
  else
     echo "$ac_t""no" 1>&6
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 2365 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>

int main() {
 return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:2375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     have_gtk_120=no_gtk_120
  fi
  
  
  rm -f conf.gtktest

     if test x$have_gtk_120 = xno_gtk_120 ; then
       # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
  withval="$with_gtk_prefix"
  gtk_config_prefix="$withval"
else
  gtk_config_prefix=""
fi

# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
  withval="$with_gtk_exec_prefix"
  gtk_config_exec_prefix="$withval"
else
  gtk_config_exec_prefix=""
fi

# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
  enableval="$enable_gtktest"
  :
else
  enable_gtktest=yes
fi


  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test -f $gtk_config_exec_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
       fi
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test -f $gtk_config_prefix/bin/gtk-config-2.0; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config-2.0
     else
       if test x${GTK_CONFIG+set} != xset ; then
          GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
       fi
     fi
  fi


  min_gtk_version=1.1.13
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:2463: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$LIBS $GTK_LIBS"
      rm -f conf.gtktest
      if test "$cross_compiling" = yes; then
  
        # Cross-compiling
        cat > conftest.$ac_ext <<EOF
#line 2486 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
        
int main() {

  return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
        
; return 0; }
EOF
if { (eval echo configure:2498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
          echo $ac_n "cross compiling; looks ok... $ac_c"
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
          no_gtk=yes
          echo $ac_n "cross compiling; linking failed... $ac_c"
        
fi
rm -f conftest*
      
else
  cat > conftest.$ac_ext <<EOF
#line 2516 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
#include <sys/stat.h>
#endif
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif

int
main ()
{
  int major, minor, micro;
  char *tmp_version;
  FILE *fp;

  /* Don't use system(3C) since it isn't thread-safe.
   *
   * system ("touch conf.gtktest");
   */
  if ((fp = fopen("conf.gtktest", "a+")) != 0) {
    fclose(fp);
  }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {

      }
    }
  return 1;
}

EOF
if { (eval echo configure:2588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

      CFLAGS="$ac_save_CFLAGS"
      LIBS="$ac_save_LIBS"
    fi
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     WITH_GTK=1
  else
     echo "$ac_t""no" 1>&6
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 2622 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>

int main() {
 return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:2632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     WITH_GTK=0
  fi
  
  
  rm -f conf.gtktest

     else
       WITH_GTK=1
     fi
   fi
 fi
 
 
 
 
 
 
 
 
 
 
 
 

 if test "x$WITH_GTK" = x2 ; then
   cat >> confdefs.h <<\EOF
#define PGTK_AUTO_UTF8 1
EOF

   have_gtk_120=gtk_120
   have_gtk_20=gtk_20
   cat >> confdefs.h <<\EOF
#define HAVE_GTK_20 1
EOF

   
   
   
   
   PGTK_CFLAGS="$GTK_CFLAGS"
   PGTK_LIBS="$GTK_LIBS"
   CFLAGS="$CFLAGS $GTK_CFLAGS"
   LIBS="$MODULE_LDFLAGS $LIBS"

# Not yet available with GTK 2.0 (Wait for gnome 2.0 etc.)
   pgtk_has_libglade=nolibglade
   pgtk_has_gnome=nognome
   pgtk_has_docklets=nodocklets
   GNOME_CFLAGS=""
   GNOME_LIBS=""
 else
   if test x"$pike_cv_sys_os" = xWindows_NT ; then
     cat >> confdefs.h <<\EOF
#define PGTK_AUTO_UTF8 1
EOF

   else
     :
   fi
 fi

if test "x$WITH_GTK" = x1 ; then
 
  
  
  cat >pike_GTK.feature <<EOF
GTK................. yes
EOF


 
 
 # Check whether --with-libglade-config or --without-libglade-config was given.
if test "${with_libglade_config+set}" = set; then
  withval="$with_libglade_config"
  LIBGLADE_CONFIG="$withval"
fi


module_args=
for module in . ; do
  case "$module" in
    gnome)
      module_args="$module_args gnome"
      ;;
  esac
done


  if test "x$enable_binary" = "xno"; then
    # Extract the first word of "nobinary_dummy", so it can be a program name with args.
set dummy nobinary_dummy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2757: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIBGLADE_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$LIBGLADE_CONFIG" in
  /*)
  ac_cv_path_LIBGLADE_CONFIG="$LIBGLADE_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_LIBGLADE_CONFIG="$LIBGLADE_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$BINDIR"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_LIBGLADE_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_LIBGLADE_CONFIG" && ac_cv_path_LIBGLADE_CONFIG="no"
  ;;
esac
fi
LIBGLADE_CONFIG="$ac_cv_path_LIBGLADE_CONFIG"
if test -n "$LIBGLADE_CONFIG"; then
  echo "$ac_t""$LIBGLADE_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    # Extract the first word of "libglade-config", so it can be a program name with args.
set dummy libglade-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2794: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIBGLADE_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$LIBGLADE_CONFIG" in
  /*)
  ac_cv_path_LIBGLADE_CONFIG="$LIBGLADE_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_LIBGLADE_CONFIG="$LIBGLADE_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_LIBGLADE_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_LIBGLADE_CONFIG" && ac_cv_path_LIBGLADE_CONFIG="no"
  ;;
esac
fi
LIBGLADE_CONFIG="$ac_cv_path_LIBGLADE_CONFIG"
if test -n "$LIBGLADE_CONFIG"; then
  echo "$ac_t""$LIBGLADE_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  fi

echo $ac_n "checking for libglade""... $ac_c" 1>&6
echo "configure:2830: checking for libglade" >&5
if test "$LIBGLADE_CONFIG" = "no"; then
  echo "$ac_t""no" 1>&6
  
  echo "********************************************************************"
  echo "Support for libglade not being compiled in."
  echo "See http://glade.pn.org/ and http://www.daa.com.au/~james/gnome/"
  echo "for more information."
  echo "********************************************************************"
  pgtk_has_libglade=nolibglade
else
  if $LIBGLADE_CONFIG --check $module_args; then
    LIBGLADE_CFLAGS=`$LIBGLADE_CONFIG --cflags $module_args`
    LIBGLADE_LIBS=`$LIBGLADE_CONFIG --libs $module_args`
    echo "$ac_t""yes" 1>&6
    
 pgtk_has_libglade=libglade
  else
    echo ""
    echo "*** libglade was not compiled with support for $module_args" 1>&2
    echo "$ac_t""no" 1>&6
    
  echo "********************************************************************"
  echo "Support for libglade not being compiled in."
  echo "See http://glade.pn.org/ and http://www.daa.com.au/~james/gnome/"
  echo "for more information."
  echo "********************************************************************"
  pgtk_has_libglade=nolibglade
  fi
fi


old_CFLAGS=$CFLAGS
old_LIBS=$LIBS
LIBS="$LIBGLADE_LIBS $LIBS"
CFLAGS="$LIBGLADE_CFLAGS $CFLAGS"
for ac_func in glade_gnome_init
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2869: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2874 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"


  if test "x$pgtk_has_libglade" = "xlibglade" ; then
    
  
  
  cat >pike_GTK_GladeXML.feature <<EOF
GTK.GladeXML........ yes
EOF


  fi

 PGTK_CFLAGS="$GTK_CFLAGS"
 PGTK_LIBS="$GTK_LIBS"
 
 CFLAGS="$CFLAGS $GTK_CFLAGS"
 LIBS="$MODULE_LDFLAGS $LIBS"
 
  # Check whether --with-GL-prefix or --without-GL-prefix was given.
if test "${with_GL_prefix+set}" = set; then
  withval="$with_GL_prefix"
  :
fi

 # Check whether --with-lib-GL or --without-lib-GL was given.
if test "${with_lib_GL+set}" = set; then
  withval="$with_lib_GL"
  :
fi

 # Check whether --with-lib-MesaGL or --without-lib-MesaGL was given.
if test "${with_lib_MesaGL+set}" = set; then
  withval="$with_lib_MesaGL"
  :
fi

 
 if test "x$with_GL_prefix" = "x" ; then
  GL_LDOPTS=""
  GL_CFLAGS=""
 else
  GL_LDOPTS="-L$with_GL_prefix/lib"
  GL_CFLAGS="-I$with_GL_prefix/include"
 fi
 
 saved_LIBS="$LIBS"
 
 # Check whether --with-gnome or --without-gnome was given.
if test "${with_gnome+set}" = set; then
  withval="$with_gnome"
  :
else
  with_gnome=yes
fi

 
 if test "x$with_gnome" = "xyes"; then
 
 
  
  
  cat >pike_Gnome.feature <<EOF
Gnome............... no (dependencies failed)
EOF


 
  if test "x$enable_binary" = "xno"; then
    # Extract the first word of "nobinary_dummy", so it can be a program name with args.
set dummy nobinary_dummy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2995: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GNOME_CONFIG" in
  /*)
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$BINDIR"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
  ;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
  echo "$ac_t""$GNOME_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    # Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3032: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GNOME_CONFIG" in
  /*)
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
  ;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
  echo "$ac_t""$GNOME_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  fi

 
 if test "$GNOME_CONFIG" = "no"; then
   :
 else
   case "`$GNOME_CONFIG --version`" in
     gnome-libs\ 1.0.*)
       GNOME_CONFIG=no
       echo "configure: warning: Gnome 1.0.x not supported" 1>&2
     ;;
   esac
 fi

 echo $ac_n "checking gnome""... $ac_c" 1>&6
echo "configure:3080: checking gnome" >&5
 
 if test "$GNOME_CONFIG" = "no"; then
   pgtk_has_gnome=nognome
   echo "$ac_t""no" 1>&6;
 else
   GNOME_CFLAGS="`$GNOME_CONFIG --cflags gnome gnomeui gnorba gtkxmhtml applets`"
   GNOME_LIBS="`$GNOME_CONFIG --libs gnome gnomeui gnorba gtkxmhtml applets`"
   pgtk_has_gnome=gnome
   echo "$ac_t""yes" 1>&6;
   
  
  
  cat >pike_Gnome.feature <<EOF
Gnome............... yes
EOF


 fi
 
 echo $ac_n "checking gnome docklets""... $ac_c" 1>&6
echo "configure:3101: checking gnome docklets" >&5
 if test "$GNOME_CONFIG" = "no"; then
   pgtk_has_docklets=nodocklets
   echo "$ac_t""no" 1>&6;
 else
   GNOME_DOCKLETS_LIBS="`$GNOME_CONFIG --libs docklets 2>/dev/null`"
   if test x"$GNOME_DOCKLETS_LIBS" = x ; then
     pgtk_has_docklets=nodocklets
     echo "$ac_t""no" 1>&6;
   else
     pgtk_has_docklets=docklets
     GNOME_LIBS="`$GNOME_CONFIG --libs gnome gnomeui gnorba gtkxmhtml applets docklets`"
     GNOME_CFLAGS="`$GNOME_CONFIG --cflags gnome gnomeui gnorba gtkxmhtml applets docklets`"
     echo "$ac_t""yes" 1>&6;
   fi
 fi

 oCFLAG="$CFLAGS"
 CFLAGS="$GNOME_CFLAGS"

 # Who came up with the XXX-config stupidity?
 if echo X "$GNOME_LIBS" | grep lpng10 >/dev/null 2>&1; then
   # Check if we actually have -lpng10...
   echo $ac_n "checking for png_read_png in -lpng10""... $ac_c" 1>&6
echo "configure:3125: checking for png_read_png in -lpng10" >&5
ac_lib_var=`echo png10'_'png_read_png | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lpng10  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3133 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char png_read_png();

int main() {
png_read_png()
; return 0; }
EOF
if { (eval echo configure:3144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo png10 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lpng10 $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

   echo $ac_n "checking for png_read_png in -lpng""... $ac_c" 1>&6
echo "configure:3172: checking for png_read_png in -lpng" >&5
ac_lib_var=`echo png'_'png_read_png | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lpng  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3180 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char png_read_png();

int main() {
png_read_png()
; return 0; }
EOF
if { (eval echo configure:3191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo png | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lpng $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

   if test "x$ac_cv_lib_png10_png_read_png$ac_cv_lib_png_png_read_png" = "xnoyes"; then
     echo "configure: warning: Adjusting LIBS to use -lpng instead of -lpng10." 1>&2
     GNOME_LIBS=`echo "$GNOME_LIBS"|sed -e 's/-lpng10/-lpng/g'`
   else :; fi
 fi

 if test "x$pgtk_has_gnome" = xgnome ; then
    # Try adding gnome-1.0 to the include path (FreeBSD uses that for gnome-1.0
    # storage path)
    real_include_dirs=''
    for flag in $CPPFLAGS; do
      case "$flag" in
        -I*)
          d="`echo Q$flag|sed -e 's/^Q-I//'`/gnome-1.0"
          echo $ac_n "checking $d""... $ac_c" 1>&6
echo "configure:3233: checking $d" >&5
          if test -d "$d/."; then
            REALDIR="`cd $d/. ; /bin/pwd`"
            if test "x$REALDIR" = x ; then
              REALDIR=UNKNOWN
            else
              :
            fi

            case " $CPPFLAGS $real_include_dirs " in
              *\ -I$d\ * | *\ -I$REALDIR\ *)
                 echo "$ac_t""already added" 1>&6
              ;;
              *)
	        OLD_CPPFLAGS="${CPPFLAGS}"
                CPPFLAGS="${CPPFLAGS} -I$d"
	        cat > conftest.$ac_ext <<EOF
#line 3250 "configure"
#include "confdefs.h"
include <stdio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3255: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  
                  echo "$ac_t""added" 1>&6
                  if test "x$REALDIR" != xUNKNOWN; then
                    real_include_dirs="${real_include_dirs} -I$REALDIR"
                  else
                    :
                  fi
	        
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
	          echo "$ac_t""fails" 1>&6
		  CPPFLAGS="${OLD_CPPFLAGS}"
	        
fi
rm -f conftest*
              ;;
	    esac
	  else
	    echo "$ac_t""no" 1>&6
	  fi
        ;;
      esac
   done

   # Do some extra effort to check for the header files, since some
   # Gnome packagings doesn't include them all (e.g. applet-widget.h on
   # Debian systems). Can't use AC_CHECK_HEADERS here since it doesn't
   # use $CFLAGS.
   
   
     echo $ac_n "checking for gnome.h""... $ac_c" 1>&6
echo "configure:3294: checking for gnome.h" >&5
if eval "test \"`echo '$''{'pgtk_cv_header_gnome_h'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
       cat > conftest.$ac_ext <<EOF
#line 3300 "configure"
#include "confdefs.h"
#include <gnome.h>
int main() {

; return 0; }
EOF
if { (eval echo configure:3307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_header_gnome_h=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_header_gnome_h=no
fi
rm -f conftest*
     
fi

echo "$ac_t""$pgtk_cv_header_gnome_h" 1>&6
   
   
     echo $ac_n "checking for libgnorba/gnorba.h""... $ac_c" 1>&6
echo "configure:3324: checking for libgnorba/gnorba.h" >&5
if eval "test \"`echo '$''{'pgtk_cv_header_libgnorba_gnorba_h'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
       cat > conftest.$ac_ext <<EOF
#line 3330 "configure"
#include "confdefs.h"
#include <libgnorba/gnorba.h>
int main() {

; return 0; }
EOF
if { (eval echo configure:3337: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_header_libgnorba_gnorba_h=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_header_libgnorba_gnorba_h=no
fi
rm -f conftest*
     
fi

echo "$ac_t""$pgtk_cv_header_libgnorba_gnorba_h" 1>&6
   
   
     echo $ac_n "checking for applet-widget.h""... $ac_c" 1>&6
echo "configure:3354: checking for applet-widget.h" >&5
if eval "test \"`echo '$''{'pgtk_cv_header_applet_widget_h'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
       cat > conftest.$ac_ext <<EOF
#line 3360 "configure"
#include "confdefs.h"
#include <applet-widget.h>
int main() {

; return 0; }
EOF
if { (eval echo configure:3367: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_header_applet_widget_h=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_header_applet_widget_h=no
fi
rm -f conftest*
     
fi

echo "$ac_t""$pgtk_cv_header_applet_widget_h" 1>&6
   
   if test "$pgtk_cv_header_gnome_h" != "yes" ; then
     pgtk_has_gnome=nognome
     
  
  cat >pike_Gnome.feature <<EOF
Gnome............... no (gnome.h not found)
EOF

   elif test "$pgtk_cv_header_libgnorba_gnorba_h" != "yes" ; then
     pgtk_has_gnome=nognome
     
  
  cat >pike_Gnome.feature <<EOF
Gnome............... no (libgnorba/gnorba.h not found)
EOF

   elif test "$pgtk_cv_header_applet_widget_h" != "yes" ; then
     pgtk_has_gnome=nognome
     
  
  cat >pike_Gnome.feature <<EOF
Gnome............... no (applet-widget.h not found)
EOF

   else
     cat >> confdefs.h <<\EOF
#define HAVE_GNOME 1
EOF

   fi
 fi
 
 echo $ac_n "checking if HAVE_SAVE_SESSION_SIGNAL is defined in applet-widget.h""... $ac_c" 1>&6
echo "configure:3415: checking if HAVE_SAVE_SESSION_SIGNAL is defined in applet-widget.h" >&5
 if eval "test \"`echo '$''{'pgtk_cv_defined_HAVE_SAVE_SESSION_SIGNAL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
 cat > conftest.$ac_ext <<EOF
#line 3421 "configure"
#include "confdefs.h"

#include <applet-widget.h> 
 
int main() {

   int i = HAVE_SAVE_SESSION_SIGNAL;
   exit(0);
 
; return 0; }
EOF
if { (eval echo configure:3433: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_defined_HAVE_SAVE_SESSION_SIGNAL='defined HAVE_SAVE_SESSION_SIGNAL'
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_defined_HAVE_SAVE_SESSION_SIGNAL=''
fi
rm -f conftest*
 
fi

 if test "x$pgtk_cv_defined_HAVE_SAVE_SESSION_SIGNAL" = "x" ; then
   echo "$ac_t""no" 1>&6
 else
   echo "$ac_t""yes" 1>&6
 fi
 
 echo $ac_n "checking if HAVE_APPLET_BIND_EVENTS is defined in applet-widget.h""... $ac_c" 1>&6
echo "configure:3453: checking if HAVE_APPLET_BIND_EVENTS is defined in applet-widget.h" >&5
 if eval "test \"`echo '$''{'pgtk_cv_defined_HAVE_APPLET_BIND_EVENTS'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
 cat > conftest.$ac_ext <<EOF
#line 3459 "configure"
#include "confdefs.h"

#include <applet-widget.h> 
 
int main() {

   int i = HAVE_APPLET_BIND_EVENTS;
   exit(0);
 
; return 0; }
EOF
if { (eval echo configure:3471: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_defined_HAVE_APPLET_BIND_EVENTS='defined HAVE_APPLET_BIND_EVENTS'
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_defined_HAVE_APPLET_BIND_EVENTS=''
fi
rm -f conftest*
 
fi

 if test "x$pgtk_cv_defined_HAVE_APPLET_BIND_EVENTS" = "x" ; then
   echo "$ac_t""no" 1>&6
 else
   echo "$ac_t""yes" 1>&6
 fi
 
 
 echo $ac_n "checking if HAVE_PANEL_PIXEL_SIZE is defined in applet-widget.h""... $ac_c" 1>&6
echo "configure:3492: checking if HAVE_PANEL_PIXEL_SIZE is defined in applet-widget.h" >&5
 if eval "test \"`echo '$''{'pgtk_cv_defined_HAVE_PANEL_PIXEL_SIZE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
 cat > conftest.$ac_ext <<EOF
#line 3498 "configure"
#include "confdefs.h"

#include <applet-widget.h> 
 
int main() {

   int i = HAVE_PANEL_PIXEL_SIZE;
   exit(0);
 
; return 0; }
EOF
if { (eval echo configure:3510: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_defined_HAVE_PANEL_PIXEL_SIZE='defined HAVE_PANEL_PIXEL_SIZE'
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_defined_HAVE_PANEL_PIXEL_SIZE=''
fi
rm -f conftest*
 
fi

 if test "x$pgtk_cv_defined_HAVE_PANEL_PIXEL_SIZE" = "x" ; then
   echo "$ac_t""no" 1>&6
 else
   echo "$ac_t""yes" 1>&6
 fi
 
 echo $ac_n "checking if HAVE_PANEL_DRAW_SIGNAL is defined in applet-widget.h""... $ac_c" 1>&6
echo "configure:3530: checking if HAVE_PANEL_DRAW_SIGNAL is defined in applet-widget.h" >&5
 if eval "test \"`echo '$''{'pgtk_cv_defined_HAVE_PANEL_DRAW_SIGNAL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
 cat > conftest.$ac_ext <<EOF
#line 3536 "configure"
#include "confdefs.h"

#include <applet-widget.h> 
 
int main() {

   int i = HAVE_PANEL_DRAW_SIGNAL;
   exit(0);
 
; return 0; }
EOF
if { (eval echo configure:3548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_defined_HAVE_PANEL_DRAW_SIGNAL='defined HAVE_PANEL_DRAW_SIGNAL'
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_defined_HAVE_PANEL_DRAW_SIGNAL=''
fi
rm -f conftest*
 
fi

 if test "x$pgtk_cv_defined_HAVE_PANEL_DRAW_SIGNAL" = "x" ; then
   echo "$ac_t""no" 1>&6
 else
   echo "$ac_t""yes" 1>&6
 fi
 
 echo $ac_n "checking if HAVE_APPLET_QUEUE_RESIZE is defined in applet-widget.h""... $ac_c" 1>&6
echo "configure:3568: checking if HAVE_APPLET_QUEUE_RESIZE is defined in applet-widget.h" >&5
 if eval "test \"`echo '$''{'pgtk_cv_defined_HAVE_APPLET_QUEUE_RESIZE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
 cat > conftest.$ac_ext <<EOF
#line 3574 "configure"
#include "confdefs.h"

#include <applet-widget.h> 
 
int main() {

   int i = HAVE_APPLET_QUEUE_RESIZE;
   exit(0);
 
; return 0; }
EOF
if { (eval echo configure:3586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pgtk_cv_defined_HAVE_APPLET_QUEUE_RESIZE='defined HAVE_APPLET_QUEUE_RESIZE'
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_defined_HAVE_APPLET_QUEUE_RESIZE=''
fi
rm -f conftest*
 
fi

 if test "x$pgtk_cv_defined_HAVE_APPLET_QUEUE_RESIZE" = "x" ; then
   echo "$ac_t""no" 1>&6
 else
   echo "$ac_t""yes" 1>&6
 fi
 
 CFLAGS="$oCFLAGS"
 
 
  if test "x$enable_binary" != "xno"; then
    for ac_hdr in X11/xpm.h 
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3613: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3618 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3623: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

  else
    for ac_hdr in X11/xpm.h 
    do
      ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
      eval "ac_cv_header_$ac_safe=yes"
    done
  fi

 echo $ac_n "checking for XpmReadFileToXpmImage in -lXpm""... $ac_c" 1>&6
echo "configure:3658: checking for XpmReadFileToXpmImage in -lXpm" >&5
ac_lib_var=`echo Xpm'_'XpmReadFileToXpmImage | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lXpm `$ac_cv_path_GTK_CONFIG --libs` $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3666 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char XpmReadFileToXpmImage();

int main() {
XpmReadFileToXpmImage()
; return 0; }
EOF
if { (eval echo configure:3677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo Xpm | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lXpm $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

 
 # End of gnome dependent stuff.
 fi
 
 echo $ac_n "checking for main in -lgtkdatabox""... $ac_c" 1>&6
echo "configure:3709: checking for main in -lgtkdatabox" >&5
ac_lib_var=`echo gtkdatabox'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgtkdatabox `$ac_cv_path_GTK_CONFIG --libs` $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3717 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:3724: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo gtkdatabox | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lgtkdatabox $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

 
  if test "x$enable_binary" != "xno"; then
    for ac_hdr in gtkdatabox.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3757: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3762 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3767: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

  else
    for ac_hdr in gtkdatabox.h
    do
      ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
      eval "ac_cv_header_$ac_safe=yes"
    done
  fi

 
 
 
 DATABOX_LIBS=""
 echo $ac_n "checking gtkdatabox support""... $ac_c" 1>&6
echo "configure:3806: checking gtkdatabox support" >&5;
 if test x$ac_cv_lib_gtkdatabox_main = xyes ; then
   if test x$ac_cv_header_gtkdatabox_h = xyes; then
     echo "$ac_t""yes" 1>&6
     DATABOX_LIBS=-lgtkdatabox
     pgtk_has_gtkdatabox=gtkdatabox
   else
     echo "$ac_t""no" 1>&6
     pgtk_has_gtkdatabox=nogtkdatabox
     echo "*******************************************"
     echo " Warning: Partial gtkdatabox installation  "
     echo " Library found, but no header files.       "
     echo " Databox support will be disabled.         "
     echo " The widget is available from              "
     echo " http://www.eudoxos.net/gtk/gtkdatabox/    "
     echo "*******************************************"
   fi
 else
   pgtk_has_gtkdatabox=nogtkdatabox
 fi


 echo $ac_n "checking OpenGL""... $ac_c" 1>&6
echo "configure:3829: checking OpenGL" >&5

 LIBS="$saved_LIBS $GL_LDOPTS -lGL $GTK_LIBS"
 cat > conftest.$ac_ext <<EOF
#line 3833 "configure"
#include "confdefs.h"

int main() {
 char glBegin(); glBegin(); 
; return 0; }
EOF
if { (eval echo configure:3840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  have_GL=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  have_GL=no
fi
rm -f conftest*
 echo "$ac_t""$have_GL" 1>&6

 if test "x$have_GL" = "xno" ; then
  echo $ac_n "checking Mesa""... $ac_c" 1>&6
echo "configure:3854: checking Mesa" >&5
  LIBS="$saved_LIBS $GL_LDOPTS -lMesaGL $GTK_LIBS"
  cat > conftest.$ac_ext <<EOF
#line 3857 "configure"
#include "confdefs.h"

int main() {
 char glBegin(); glBegin(); 
; return 0; }
EOF
if { (eval echo configure:3864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  have_MesaGL=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  have_MesaGL=no
fi
rm -f conftest*
  echo "$ac_t""$have_MesaGL" 1>&6

  if test "x$have_MesaGL" = "xno"; then
   echo $ac_n "checking Mesa with pthreads""... $ac_c" 1>&6
echo "configure:3878: checking Mesa with pthreads" >&5
   LIBS="$saved_LIBS $GL_LDOPTS -lMesaGL -lpthread $GTK_LIBS"
   cat > conftest.$ac_ext <<EOF
#line 3881 "configure"
#include "confdefs.h"

int main() {
 char glBegin(); glBegin(); 
; return 0; }
EOF
if { (eval echo configure:3888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  have_MesaGL_pthread=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  have_MesaGL_pthread=no
fi
rm -f conftest*
   echo "$ac_t""$have_MesaGL_pthread" 1>&6
  fi
 fi

 LIBS="$saved_LIBS"


 if test "x$with_lib_GL" = "xyes"; then

 if test "x$have_GL" = "xyes"; then
  GL_LIBS="$GL_LDOPTS  -lGL"
 else
  { echo "configure: error: Missing GL library" 1>&2; exit 1; }
 fi

 elif test "x$with_lib_MesaGL" = "xyes"; then

 if test "x$have_MesaGL" = "xyes"; then
  GL_LIBS="$GL_LDOPTS -lMesaGL"
 elif test "x$have_MesaGL_pthread" = "xyes"; then
  GL_LIBS="$GL_LDOPTS -lMesaGL -lpthread"
 else
  { echo "configure: error: Missing MesaGL library" 1>&2; exit 1; }
 fi

 else

 if test "x$have_GL" = "xyes"; then
  GL_LIBS="$GL_LDOPTS -lGL"
 elif test "x$have_MesaGL" = "xyes"; then
  GL_LIBS="$GL_LDOPTS  -lMesaGL"
 elif test "x$have_MesaGL_pthread" = "xyes"; then
  GL_LIBS="$GL_LDOPTS  -lMesaGL -lpthread"
 else
  have_GL=no
 fi
 fi
 fi

 CFLAGS="$GL_CFLAGS $CFLAGS"

 
 pgtk_has_glarea=noglarea

 if test "x$have_GL" = "xyes" ; then
  echo $ac_n "checking for main in -lgtkgl""... $ac_c" 1>&6
echo "configure:3944: checking for main in -lgtkgl" >&5
ac_lib_var=`echo gtkgl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgtkgl `$ac_cv_path_GTK_CONFIG --libs` $GL_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3952 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:3959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo gtkgl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lgtkgl $LIBS"

else
  echo "$ac_t""no" 1>&6
fi

  if test x$ac_cv_lib_gtkgl_main = xyes ; then
    pgtk_has_glarea=glarea
    
  
  
  cat >pike_GTK_GlArea.feature <<EOF
GTK.GlArea.......... yes
EOF


    LIBS="$GL_LIBS $LIBS"
  else
    unset ac_cv_lib_gtkgl_main
    echo "*********************************************"
    echo " Warning: Failed to find the GTK GL widget.  "
    echo " GL-support will be disabled.                "
    echo " The widget is available from                "
    echo " http://www.student.oulu.fi/~jlof/gtkglarea/ "
    echo "*********************************************"
  fi
 fi
  echo $ac_n "checking for XSetScreenSaver in -lX11""... $ac_c" 1>&6
echo "configure:4008: checking for XSetScreenSaver in -lX11" >&5
ac_lib_var=`echo X11'_'XSetScreenSaver | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lX11  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4016 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char XSetScreenSaver();

int main() {
XSetScreenSaver()
; return 0; }
EOF
if { (eval echo configure:4027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  have_x11=x11
else
  echo "$ac_t""no" 1>&6
have_x11=nox11
fi

  if test "x$have_x11" = "xx11" ; then
   oCFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS $GTK_CFLAGS"
   echo $ac_n "checking X11 in GDK using gdkx.h""... $ac_c" 1>&6
echo "configure:4052: checking X11 in GDK using gdkx.h" >&5
   cat > conftest.$ac_ext <<EOF
#line 4054 "configure"
#include "confdefs.h"

#include <gdk/gdk.h> 
#include <gdk/gdkx.h> 
#include <gdk/gdkprivate.h>
 
int main() {

     GdkWindowPrivate *w = (GdkWindowPrivate *)0;
     &w->xwindow;
 
; return 0; }
EOF
if { (eval echo configure:4068: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  have_x11=x11
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  have_x11=nox11
fi
rm -f conftest*
  if test "x$have_x11" = "xx11" ; then
   echo "$ac_t""yes" 1>&6
  else
   echo "$ac_t""no" 1>&6
  fi
  if test "x$have_x11" = "xx11" ; then
  
   echo $ac_n "checking X11 DPMS extension""... $ac_c" 1>&6
echo "configure:4086: checking X11 DPMS extension" >&5

   cat > conftest.$ac_ext <<EOF
#line 4089 "configure"
#include "confdefs.h"

#include <gdk/gdk.h> 
#include <gdk/gdkx.h> 
#include <X11/extensions/dpms.h> 
 
int main() {

     CARD16 state;
     BOOL dpms_off;
     DPMSInfo(GDK_DISPLAY(), &state, &dpms_off);
 
; return 0; }
EOF
if { (eval echo configure:4104: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  _res=1
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  _res=0
fi
rm -f conftest*

 if test "x$_res" = "x1" ; then
   echo "$ac_t""yes" 1>&6
   cat >> confdefs.h <<\EOF
#define HAVE_DPMS 1
EOF

 else
   echo "$ac_t""no" 1>&6
 fi
 fi
  CFLAGS="$oCFLAGS"

  fi
else
  WITH_GTK=0
fi

# On some systems, gtk-config et al points to uninstalled
# libraries. Use this to be able to detect a faulty installation
# of GTK, ie try a real link. If it fails, warn and don't try
# to use GTK or the detected libs.
echo $ac_n "checking if GTK really links""... $ac_c" 1>&6
echo "configure:4137: checking if GTK really links" >&5
if eval "test \"`echo '$''{'pgtk_cv_gtk_really_links'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
   saved_CFLAGS="$CFLAGS"
   saved_LIBS="$LIBS"
   CFLAGS="$CFLAGS $GTK_CFLAGS"
   LIBS="$LIBS $GTK_LIBS"
   cat > conftest.$ac_ext <<EOF
#line 4147 "configure"
#include "confdefs.h"
int gtk_init();
int main() {
gtk_init();
; return 0; }
EOF
if { (eval echo configure:4154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  pgtk_cv_gtk_really_links=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pgtk_cv_gtk_really_links=no
fi
rm -f conftest*
   CFLAGS="$saved_CFLAGS"
   LIBS="$saved_LIBS"

fi

echo "$ac_t""$pgtk_cv_gtk_really_links" 1>&6
if test "x$pgtk_cv_gtk_really_links" = "xno" ; then
  WITH_GTK=0
  PGTK_LIBS=""
  GNOME_LIBS=""
  LIBGLADE_LIBS=""
  LIBS=""

  
  
  cat >pike_GTK.feature <<EOF
GTK................. no (linking failed, erroneous installation?)
EOF

  echo "configure: warning: GTK found, but linking failed. Your installation seems to
be missing pieces. See .../post_modules/GTK/config.log." 1>&2
fi


  echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:4189: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


  
  export prefix
  
  export exec_prefix
  
  export CC
  
  export CPP
  
  export BINDIR
  
  export BUILDDIR
  
  export PIKE_SRC_DIR
  
  export BUILD_BASE
  
  export INSTALL
  
  export AR
  
  export CFLAGS
  
  export CPPFLAGS
  
  export OPTIMIZE
  
  export WARN
  
  export CCSHARED
  
  export LDSHARED

  PMOD_TARGETS=`echo $srcdir/*.cmod | sed -e "s/\.cmod/\.c/g" | sed -e "s|$srcdir/|\\$(SRCDIR)/|g"`
  test "$PMOD_TARGETS" = '$(SRCDIR)/*.c' && PMOD_TARGETS=
  

  echo $ac_n "checking for the Pike base directory""... $ac_c" 1>&6
echo "configure:4254: checking for the Pike base directory" >&5
  if test "x$PIKE_SRC_DIR" != "x" -a -f "${PIKE_SRC_DIR}/make_variables.in"; then
    make_variables_in="${PIKE_SRC_DIR}/make_variables.in"
    echo "$ac_t""${PIKE_SRC_DIR}" 1>&6

    # Kludge for autoconf 2.13 and earlier prefixing all substitution
      # source files with $ac_given_source_dir/ (aka $srcdir/).
      make_variables_in="`cd $srcdir;pwd|sed -e 's@[^/]*@@g;s@/@../@g'`$make_variables_in"
    
  else

    counter=.

    uplevels=
    while test ! -f "$srcdir/${uplevels}make_variables.in"
    do
      counter=.$counter
      if test $counter = .......... ; then
        echo "$ac_t""failed" 1>&6
        exit 1
      else
        :
      fi
      uplevels=../$uplevels
    done

    make_variables_in=${uplevels}make_variables.in
    echo "$ac_t""${uplevels}." 1>&6
  fi

  

  
  make_variables=make_variables

  # Autoconf 2.50 and later stupidity...
  

  
  trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir

trap 'rm -fr `echo "make_variables:$make_variables_in Makefile options pgtk_config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@CONFIG_HEADERS@%$CONFIG_HEADERS%g
/@dependencies@/r $dependencies
s%@dependencies@%%g
/@dynamic_module_makefile@/r $dynamic_module_makefile
s%@dynamic_module_makefile@%%g
/@static_module_makefile@/r $static_module_makefile
s%@static_module_makefile@%%g
s%@CROSS@%$CROSS%g
s%@RUNPIKE@%$RUNPIKE%g
s%@RUNTPIKE@%$RUNTPIKE%g
s%@PKG_CONFIG@%$PKG_CONFIG%g
s%@have_x11@%$have_x11%g
s%@have_gtk_20@%$have_gtk_20%g
s%@have_gtk_120@%$have_gtk_120%g
s%@GTK_CONFIG@%$GTK_CONFIG%g
s%@GTK_CFLAGS@%$GTK_CFLAGS%g
s%@GTK_LIBS@%$GTK_LIBS%g
s%@pgtk_has_libglade@%$pgtk_has_libglade%g
s%@PGTK_CFLAGS@%$PGTK_CFLAGS%g
s%@PGTK_LIBS@%$PGTK_LIBS%g
s%@GNOME_CFLAGS@%$GNOME_CFLAGS%g
s%@GNOME_LIBS@%$GNOME_LIBS%g
s%@pgtk_cv_defined_HAVE_SAVE_SESSION_SIGNAL@%$pgtk_cv_defined_HAVE_SAVE_SESSION_SIGNAL%g
s%@pgtk_cv_defined_HAVE_PANEL_BIND_EVENTS@%$pgtk_cv_defined_HAVE_PANEL_BIND_EVENTS%g
s%@pgtk_cv_defined_HAVE_PANEL_PIXEL_SIZE@%$pgtk_cv_defined_HAVE_PANEL_PIXEL_SIZE%g
s%@pgtk_cv_defined_HAVE_PANEL_DRAW_SIGNAL@%$pgtk_cv_defined_HAVE_PANEL_DRAW_SIGNAL%g
s%@pgtk_cv_defined_HAVE_APPLET_QUEUE_RESIZE@%$pgtk_cv_defined_HAVE_APPLET_QUEUE_RESIZE%g
s%@pgtk_has_gnome@%$pgtk_has_gnome%g
s%@pgtk_has_docklets@%$pgtk_has_docklets%g
s%@WITH_GTK@%$WITH_GTK%g
s%@LIBGLADE_CONFIG@%$LIBGLADE_CONFIG%g
s%@LIBGLADE_CFLAGS@%$LIBGLADE_CFLAGS%g
s%@LIBGLADE_LIBS@%$LIBGLADE_LIBS%g
s%@GNOME_CONFIG@%$GNOME_CONFIG%g
s%@pgtk_have_gtkdatabox@%$pgtk_have_gtkdatabox%g
s%@DATABOX_LIBS@%$DATABOX_LIBS%g
s%@pgtk_has_glarea@%$pgtk_has_glarea%g
s%@SET_MAKE@%$SET_MAKE%g
s%@BINDIR@%$BINDIR%g
s%@BUILDDIR@%$BUILDDIR%g
s%@PIKE_SRC_DIR@%$PIKE_SRC_DIR%g
s%@BUILD_BASE@%$BUILD_BASE%g
s%@INSTALL@%$INSTALL%g
s%@AR@%$AR%g
s%@OPTIMIZE@%$OPTIMIZE%g
s%@WARN@%$WARN%g
s%@CCSHARED@%$CCSHARED%g
s%@LDSHARED@%$LDSHARED%g
s%@PMOD_TARGETS@%$PMOD_TARGETS%g
s%@make_variables_in@%$make_variables_in%g
/@make_variables@/r $make_variables
s%@make_variables@%%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"make_variables:$make_variables_in Makefile options"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac


  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="pgtk_config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF

EOF
cat >> $CONFIG_STATUS <<\EOF

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1


